General Aids
| Cycle time | 12 minutes per cycle |
| Volume test range | 0 mL to 150 mL ( ±3 % ) |
| Operational Workstation | Single |
| Minimum Water inlet Flow | 1.5 L/min |
| Cycle time | 12 minutes per cycle |
| Volume test range | 0 mL to 150 mL ( ±3 % ) |
| Operational Workstation | Double |
| Minimum Water inlet Flow | 1.5 L/min |
| Cycle time | 8 minutes per cycle |
| Volume test range | 0 mL to 150 mL ( ±3 % ) |
| Operational Workstation | |
| Minimum Water inlet Flow |
| Vibration Generator | Piezo-ceramic generator |
| Vibration Excursion | ≤ 100 μm |
| Vibration Frequency | 28 kHz ± 3 kHz |
| Modes | Continuous operation |
| Vibration Generator | Piezo-ceramic generator |
| Vibration Excursion | ≤ 200 μm |
| Vibration Frequency | 28 kHz ± 3 kHz |
| Modes | Continuous operation |
| Vibration Generator | Piezo-ceramic generator |
| Vibration Excursion | ≤ 100 μm |
| Vibration Frequency | 28 kHz ± 3 kHz |
| Modes | Continuous operation |
| Nebulization Rate | 4 ml/min |
| Filter Particle Dimension | 4.2 microns |
| Continuous Performance | 0 - 4 hrs |
| Timing Range | 0-60 min (no level for adjustment) |
| Nebulization Rate | 0.20 ml/min |
| Compression Pump Rate | >10 L/min |
| Compressor Pressure | 14 psi , 40psi |
| Consistent Work Performance | Up to 7000 hours |
| Speed | ≥ 800 cassettes per hour |
| Method | Ribbon thermal transfer mode |
| Print Resolution | 400 dpi |
| Print medium type | 35 mm wide thermal transfer ribbon |
| Speed | ≥ 800 slides per hour |
| Method | Ribbon thermal transfer mode |
| Print Resolution | |
| Print medium type | 30 mm wide thermal transfer ribbon |
| Vacuum Pressure | ( Negative ) 0.075 MPa |
| Reservoir Capacity | 1000 ml (1 Jar) |
| Pumping Rate | 15 L/min |
| Continuous Operation | Up to 30 min |
| Vacuum Pressure | ( Negative ) 0.09 MPa |
| Reservoir Capacity | 2500 ml ( 2 Jars ) |
| Pumping Rate | ≥ 20 L/min |
| Continuous Operation | Up to 30 min |
| Vacuum Pressure | ( Negative ) 0.09 MPa |
| Reservoir Capacity | 2500 ml ( 2 Jars ) |
| Pumping Rate | ≥ 20 L/min |
| Continuous Operation | Up to 30 min |
| Optical Technology | Infrared Projection |
| Luminosity Range | 300 lux ~ 1000 lux |
| Optimal Temperature | 0℃ ~ 40℃ |
| Optimal Humidity | ≤ 80% |
| Optical Technology | Infrared Projection |
| Luminosity Range | 300 lux ~ 1000 lux |
| Optimal Temperature | 0℃ ~ 40℃ |
| Optimal Humidity | ≤ 80% |
| Geometrical | 320 dpi (12.6 pixel/mm) |
| Processor | Intel |
| Interface | TCP/IP |
| Gray Scale Resolution | 12 bit ( 4096 gradation ) |
Copyright © Labopark Scientific Inc. All Rights Reserved
